Rigger Self Test Mode
23/09/2010
Rigger 8, 16 and 32 units have a built in self-test mode, which is activated when they are powered up.
If the Rigger is powered on with the control Key switch in the spring loaded Limits position and any channel select switch not in the OFF position, self test mode will be entered a short time after the software version number has been displayed.
The unit will exit this mode when all channel select switches are in the OFF position. Any channel select switch that is not in an OFF position will illuminate either the up or down indicator
to show that the system has read the switch correctly. The Speed Control will illuminate the Status indicators, and the GO button will invert these indicators.
Products
General
Support
If you require further support call us now on:
+44 (0)20 8481 9850
or email us at:
support@kinesys.co.uk
Training
View our range of training courses
