|
Kinesys
- Products
- Elevation Power 8
 The
elevation POWER 8 is an eight-channel fixed-speed
chain-hoist controller. It incorporates an extensive
range of features in a compact rack mounting module.
The unit is designed for use with low voltage control
chain hoists and has a universal voltage input allowing
it to be used in all regions of the world without
any adjustment.
Four 16A C-type miniature circuit breakers (MCB)
provide protection for the eight hoist supplies. A
residual current device (RCD) is available as an option.
In normal operation voltage is only supplied to the
hoists when they are required to move; a 'pickles
enable' mode provides permanent power to the hoists
when necessary for rigging.
Phase rotation and presence is monitored by the POWER
8, with hoist operation being prevented when rotation
is incorrect or any phase is not present. Phase rotation
can be reversed using a switch on the rear of the
unit.
Local running controls are included as well as a
'remote go' facility and an emergency stop system.
Status indicators are included for each channel which
will illuminate to indicate that a chain hoist is
connected and powered. The low voltage remote input
is compatible with most hoist control systems, including
the Kinesys elevation 24.
The elevation POWER 8 is built to
meet or exceed all relevant European safety standards.
 |
8 channel chain hoist control
module |
|
compatible with all common
makes of low voltage control chain hoists |
|
universal input voltage for
worldwide use |
|
power only supplied to the
hoists when movement is required - 'pickles' mode
for permanent power supply during rigging |
|
basic emergency stop built
in with linking facilities to allow connection
to a system-wide emergency stop system where required |
|
ability to accept remote 'dead
man's handle' inputs to ensure safe running in
multiple observer environments |
|
remote 'Go' link to allow multiple
units to be controlled from a single go button |
|
status indicators to show when
chain hoists are connected |
|
phase rotation and phase loss
protection included; phase rotation switch provided
to allow for incorrectly wired supplies |
|
Industry standard Socapex connections
for hoist power and control |
|
Remote handset connector fitted
as standard |
|
rugged, compact 4U 19"
rack mounted enclosure |
|
CE marked |
Top
of page
|
